FASS Motor Update Campaing....starts today!

[monkeyman]

Put Dielectric grease around connectors and all exposed parts. I use it on all electrical fittings.

Rick

 

[Casey Ray]

Diesel Dan,



My original FASS serial # 194 (95 model) has developed a leak, so I ordered the upgrade through Source Automotive. I received the updated FASS HPFP, however the new pump will not mount up to my original bracket. Was I supposed to receive a new bracket, or was I sent the wrong pump, my old pump has 4 studs that protrude through the bracket which then have a washer and nut to secure the pump to the bracket. The new pump does not have the studs. My truck has been down over a week now and I really need to get this fixed. Can you help?



Thanks,



Casey

 

[LowFly]

Diesel Dan,



My original FASS serial # 194 (95 model) has developed a leak, so I ordered the upgrade through Source Automotive. I received the updated FASS HPFP, however the new pump will not mount up to my original bracket. Was I supposed to receive a new bracket, or was I sent the wrong pump, my old pump has 4 studs that protrude through the bracket which then have a washer and nut to secure the pump to the bracket. The new pump does not have the studs. My truck has been down over a week now and I really need to get this fixed. Can you help?



Thanks,



Casey

Do you still have the #194 pump? What you can do is change out the studs to the new pump and use the current bracket. If you wish to have the updated bracket, i will ship one out, and only refund $155 for the core charge like stated on the first page of this thread. Contact Rip about this and have him call me if you want to do this.

 

[Junior]

Diesel Dan hey i sent the pump back to scott at mass diesel 2 or 3 weeks ago. just seein how long it takes to get the credit for the core charge.



Philip Brand

 

[LowFly]

Diesel Dan hey i sent the pump back to scott at mass diesel 2 or 3 weeks ago. just seein how long it takes to get the credit for the core charge.



Philip Brand

Call Scott with this question... . i can not answer this for you since I did not directly charge you. BUT i have recieved your pump back.

 

[Junior]

Did you give him the ok for the credit for the core charge yet. he said he was waiting on you to call him on the answer

 

[LowFly]

Did you give him the ok for the credit for the core charge yet. he said he was waiting on you to call him on the answer

I call him.....

 

[LowFly]

Got the pump yesterday and the new mount is sweet, motor looks beefier also.

However, there is a problem, The electrical connector got brokem in shipping it looks like. The end on the motor the plastic that goes around the prongs is half broken so the prongs are visible.



I might be able to still use it but kind of hesitant of leaving thm esposed even if i do wrap it up with electical tape moisture will still find it way in down there.



What shoudl i do

ALSO... i dont know how i missed this... ... . Ill get your info from scott and get you a new connector... . they are easily swaped.

 

[Aaron_A]

OH MAN, I kinda spaced this out

I was planning on getting the updated pump but I ordered mine direct from Brad,and the closest dealer is several hundred miles from me. If its not too late what should I do?

 

[LowFly]

OH MAN, I kinda spaced this out

I was planning on getting the updated pump but I ordered mine direct from Brad,and the closest dealer is several hundred miles from me. If its not too late what should I do?

We bumped it into this year..... since it was very successful. Just call any FASS dealer and we can drop ship the pump to you. If they don’t understand, just have the dealer call me and i will explain it to them.

 

[Aaron_A]

I have the new pump installed and will send the warranty paperwork in the morning. The new pump seems to be a lot louder than the old pump. I cant remember if my old pump was this loud and quieted down after a few miles or if it was always quiet. Its been so dang cold here lately I hate to go outside and look at it (todays high temp was -10 below)

I still need to get the old pump boxed and shipped out too,sorry I'm so slow.

 

[LowFly]

I have the new pump installed and will send the warranty paperwork in the morning. The new pump seems to be a lot louder than the old pump. I cant remember if my old pump was this loud and quieted down after a few miles or if it was always quiet. Its been so dang cold here lately I hate to go outside and look at it (todays high temp was -10 below)

I still need to get the old pump boxed and shipped out too,sorry I'm so slow.

WELL at that temp the fuel will be thicker and pump noise will be louder. Mine is doing the same thing at 10*F. Once it gets a little warmer, it should quiet up.....

 

[Joseph Donnelly]

I have noticed that other pumps are louder when it is cold, it's nothing to consider a problem or fault in the FASS pump.

 

[ABarrey]

Hey Dan is the upgrade campain still going?

Andy Barrey FASS SN#2091

 

[LowFly]

Hey Dan is the upgrade campain still going?

Andy Barrey FASS SN#2091

Yup... . sure is... ... and if you pump is a FASS (Not HPFP) you are covered under the program... .

 

[GQuigley]

Diesel-Dan

I bought a Fass-150 S/N2405 about 3-1/2 years ago from Brad (?) at a truck show in Orange Co. , Ca. Because of a bad back I wasn't able to install it. It has been in the box in the garage since then. I now need to install it with the help of a friend. Do you think the seals are still good or what?

It is unused but I wonder if some parts are obsolete.

Gary

 

[LowFly]

Diesel-Dan

I bought a Fass-150 S/N2405 about 3-1/2 years ago from Brad (?) at a truck show in Orange Co. , Ca. Because of a bad back I wasn't able to install it. It has been in the box in the garage since then. I now need to install it with the help of a friend. Do you think the seals are still good or what?

It is unused but I wonder if some parts are obsolete.

Gary

Well..... i dont think you will have any issue with installing and running the kit. BUT if its unused, let me talk to Brad and see if we might have some options for you. Dont install it just yet. Ill PM you tom.

 

[moonranch]

<TABLE cellSpacing=0 cellPadding=0 width="100%" border=0><TBODY><TR><TD align=left><!-- google_ad_section_start(weight=ignore) -->Diesel-Dan

</TD></TR></TBODY></TABLE>
I have a HPFP serial #7025 that seems to be noisey. I can hear it in the drivers seat even when the truck is idling, the windows are up and the radio is on. Are you still doing the "quiet" modifications?

 

[LowFly]

<TABLE cellSpacing=0 cellPadding=0 width="100%" border=0><TBODY><TR><TD align=left><!-- google_ad_section_start(weight=ignore) -->Diesel-Dan



</TD></TR></TBODY></TABLE>

I have a HPFP serial #7025 that seems to be noisey. I can hear it in the drivers seat even when the truck is idling, the windows are up and the radio is on. Are you still doing the "quiet" modifications?

Just so you know... . that is the "Other" Diesel Dan on this site... ... Dont contact him with any FASS quesitons... . he can't help... . haha...



BUT yes... . we are still running the noise update... .



Click here.....

 

[GQuigley]

Well..... i dont think you will have any issue with installing and running the kit. BUT if its unused, let me talk to Brad and see if we might have some options for you. Dont install it just yet. Ill PM you tom.

Diesel-Dan

Any word yet?

Gary