I may have to get a 68RFE in my new truck.

[Stuart Carter Brandt]

I understand yes sir let's see what they can do all right well got to go up to a Ludington Michigan and deliver a little RV tomorrow morning.

 

[Newsa]

Didn't some of those dually rear fenders used to be fiberglass?

 

[R.Taylor]

This is the second accident involving the bed now, I suggest you get something like this since you tow often...

 

[Cummins12V98]

That sucks!!!

 

[Stuart Carter Brandt]

I concur completely yes it sucks that I screwed up the side of the truck however my body shop guy that fixed the right side seems to think this would be easier I don't know why but he seems to think this one is easier probably because it's a much smaller area that's got messed up?????

 

[dieselshadow]

I’m still trying to figure out how that happened....

 

[Stuart Carter Brandt]

I made a left turn with a 34 foot travel trailer in a parking lot at a hotel and I turned way too short and it hit that side of the the actual RV hit the side of the truck and bent it but it did not damage the RV not really????

 

[JR]

I’m still trying to figure out how that happened....

Clyde must of signaled a left turn instead....

 

[Stuart Carter Brandt]

 

[Cummins12V98]

So, what are you showing us ???

Did you get your little dent fixed?

 

[Stuart Carter Brandt]

I am actually going to talk to I'm back in Virginia I'm actually going to talk to the the guys that did my dent on the right side about that also I finally made the decision my wife located I'm buying a ABW companion tomorrow and I'm also going to reinstall have them reinstall the more ride the chucking is just unbelievable with this in a with a jayco and with the Dodge 3500 I just the chucking is just it's it's it's insane and the only thing that stops that is the more ride 10 box if that doesn't work which I'm almost positive it will the next purchase will be a flex air by lippard which is an air ride with an anti chuckin feature on the bottom of it but yeah guys finally decided to bite the bullet so we'll see what happens tomorrow??????

 

[AH64ID]

The only unbelievable thing is that you cannot figure out that talk to text just isn’t for you.

 

[Signal73]

At least read it and make corrections after you dictate it...

 

[Stuart Carter Brandt]

Well okay guys I am in Ashland Kentucky on my way to nappanee Indiana to transport some RVs I'm at the Ashland Huntington West Campground KOA and it was very hot today or today it was about 94° which is pretty hot I plan on getting the BW companion up in Elkhart area and see if that helps with all the chucking I'm getting I mean I'm getting so much chucking it's not funny but okay I'm reading it as I'm going in other words I am reading what the text-to-speech is doing and if I talk slowly it works better I will also most likely get a flex air pin box by lippert does anybody else here have a flex air pin box that's the air ride pin box with the pivoting head on the bottom which absorbs about an inch and a half of chucking??????

 

[Cummins12V98]

Stuart be sure to set the head supporting arms FULL FORWARD with the straight edge towards the cab!!!

I would try your pin box first. But the FlexAir would be a good option.

 

[AH64ID]

If you still have the Mor/Ryde pin box that came with the trailer I would use that.

I would also recommend the RVK3600 for the OEM pucks over the RVK3500. The RVK3500 will work great, but the RVK3600 is better.

 

[gsbrockman]

If you still have the Mor/Ryde pin box that came with the trailer I would use that.

I would also recommend the RVK3600 for the OEM pucks over the RVK3500. The RVK3500 will work great, but the RVK3600 is better.

What’s the differences between the 3500 and 3600?

 

[AH64ID]

What’s the differences between the 3500 and 3600?

3500 uses the B&W turnover ball as a mount, so the weight and some of the forces go thru the bed.

3600 is the puck system and nothing touches the bed. All the weight/forces goes directly to the frame. Even if a truck doesn’t have pucks it’s easy to add. @SnoKing did it to his ‘15.

 

[Cummins12V98]

3500 sets on the bed attached to the gooseneck post. and is 20k rated.

For your viewing pleasure the B&W RVK3600

 

[Stuart Carter Brandt]

I don't have the puck system I have the BMW 1320 turnover ball 80000 thousand dollar truck I had no Puck system and it had none no on the back of didn't have the step that you pop up with your foot that pops out?????