Recent Content by 12Vmudder

I went with a PSC Motorsports steering box when I rebuilt my front end in April... I am very satisfied with the performance of the box... Here is what I purchased Steering box... . PSC Motorsports... ... SG-841M... ... $450. 92 - $100 core

I recently rebuilt the front end of my truck and when doing so went with the Skyjacker 2. 5" lift coils and bilstein shocks... So far I am very satisfied with the new ride of my truck but since I did so many things to it at once I can't tell what all did what... anyway here is a link to the...

I redid my head in April and a local diesel mechanic told me to torque them and then start the truck and let it idle until it is up to operating temp. . I think I let mine idle 20min or so and then let it cool overnight and then retorque them again... Thats what I did and I have 0-rings and I...

I bought mine from Fastenal... I'd have to dig it out to tell you what pitch the threads are... I think it was about $15 or $20.

Hey I'm in the New Orleans area for the summer and I have changed out a clutch before... Bad news is I leave to go back to Missouri on the 15th... If theres anything I can help you with before then I'd be willing Derek

I blew my head gasket and just did the whole job in April... I'll recommend doing what I did which is go ahead and get some 60lb valve springs and then take your head in to a good machine shop to have them check it to see if its warped. Mine was warped . 009 so they ended up taking off . 010 and...

Over the last couple weeks I rebuilt almost my entire front end and in the process had the front axle completely out from under the truck. I reinstalled everything and thought everything was fine and didnt even check the 4x4. Well this weekend I was in some wet grass and put it in 4 just to keep...

Check to see if it has aftermarket injectors... I just installed 370's in mine last week and I notice a small power surge at low RPM's with them that I didnt have before hand

I'm needing to know this same thing since I forgot to bring one of the bolts with me from the shop last night and I want to buy some new ones while I'm in town at work today. . Anyone know off hand what the size of the downpipe bolts?

I just installed a PSC box last week and Pavemen is right there are only four ways to put the pitman arm on so it is very unlikely that you put it on wrong...

Same here... . at least 3 orders with no issues for me

Most of my front suspension and steering components and a mixture of beer cans while working

Yep thats exactly right... The part numbers MOOG 1999 3500 "T" steering setup Part numbers ES3496, ES3497, DS1456, DS1459, ES2012S, ES3498S those are all the components that you need to have a complete "T" setup 12Vmudder

I plan on using Valvoline Max Life when I put mine back together next week

I'm in the middle of rebuilding the entire front end on my truck and replacing it all with the heaviest, best products I could find. . I'm also converting to the "T" setup. . Here is the thread I started with the part numbers of everthing I'm doing Yes all the Tie rods are greasable...