Recent Content by AndersNilsson

Many yeras ago i hade problem with the A/C system of my 1997 3500 Cummins. The pressure was to high att the low pressure side, and to low at the high pressure side. I been told to replace the accumulator. I did that, and the A/C was working perfectly. Now the truck have been unused many years...

Seems to be a nice build Timd32.:-) Is it a o-ring,or a grommet, to seal around the dip stick tube? Or is it depending on the yera of the transmission?

What is the proper way to adjust the TC cable? The old one was to rusty, so the cable did not get back after full throttle. The lever was left in full throttle position. I installed a new cable, and test to adjust i in both end position. When i adjust it full forward, the tc lever started to...

Only service, or will it be rebuild with some aftermarket heavy duty parts, to withstand a tuned engine? Did you have some forum thread of your reubuild? Today i replaced the leaking gear shift lever sealing. Hope i soon have found and fixed all leaks.

Hello. When you search for wiper blades on a 1997 Truck, you get 20". Now i have about 22" inch, and i do not want to have smaler. Maybe som bigger. What did most people use? Im from Sweden so i buy most parts to my truck from internet based stores. I shall now order some parts from rock...

Thank you. I re-check the oil level, filled up, and now it seems working great. I have the ATSG manual, and have also study some movies. Think i have been little interested in the 47RE:-)

Hello. Just replaced the oil pan gasket due to leakage. I adjust the low/reverse bande due to themanual, and also info from the internet. 8nm, than back of 3 turns. When i test drive i think its slipper little when a gine it throttle in D, but not in Reverse. Maybe its imagination, but i think...

Hello. I have mounted the T-Case back at the truck. The breather hose for the T-Case was left at the truck, but now i see that it just laying loose on top of the Automatic transmission. In the end, it is a bent pipe with a bracket. Someone know were to mount? I do not want it fell down on the...

Hello. In the 47RE it si recomended to not use Dexron. So is it some additive the Dexron missing, or is it some additive Dexron have that the 47 re do not like? So if an oil is approved both to Dexron and +4, and the Dexron is missiong some additive, this additive probably is added? But if an...

Thank you all very much, for the answers. Very good info.

Hello and thanks. I have a leakage from the coupling between the pipes and the hose, in the transmission cooling circuit. The last distance to the cooler in the front is hose. Will it be leakage free with new hoses, or is it a known problem? Thank you.

Hello. Is it possible to fill ATF +4 in the 47RE? I think that +4 have replaced both +2 an +3. But +4 is syntetic and +2 was mineral? Or is both +2 and +4 available in minral and syntetic. I have also seen that +4 bottles is marked ATF U. Is U and +4 the same? Best regards.

Hello. I have a 3500 1977 4x4 automatic Dodge Ram. It has some oil leak on the engine. This weekend a shall wash the engine in try to find the source of the leakage. Were is the most common places to check? It is oil on the bottom of the oil pan, so i think its the pan gasket, but maybe...