Recent Content by APulpan

so for the past couple weeks I've noticed that after driving my pickup it idles higher (900-1100) RPM. on initial start up it idles normal but once driven, I experience the previous stated. This morning I was headed to work and came to a stop light. it was idled up to 1100 RPM. once I made my...

Soooo I took it back to the shop where I bought the moog ball joints to have there 2nd opinion input. Come to find out, they apparently have done a few dodge pickup front end repairs and have done the research and like KILLER 223 said the up and down movement is Normal ( I have less than an...

well I went out to the shop when the service advisor told me because I wanted to see what they were seeing. It moves up and down a little bit but not side to side. Come to find out when I took it for a 2nd opinion (repair shop where I bought the moog ball joints) and I was there when they...

I just posted a thread b 4 I had found this thread. I have just replaced my upper and lower ball joints 36,000 miles ago and I went with moog. Just went for an alignment because I got new tires and now they have slop in them. My previous tires had no abnormal wear. So my question is WHY??? I...

Well I chose to use Larry B's as most of you advised that and it turned out exceptionally well. Thanks for all the input.

So I got new tires on and took it in to check the alignment. Found out that upper and lower ball joints move. :mad: I did not show any abnormal wear on the old tires and had worn quite well. I went with Moog becuz of the name and reputation. So with only 36,000 miles on them the big question is...

So it sounds like the fact that the rotors can be turned I think I will go with regular flat rotors. Any brand that is better than your normal oriellys. I'd like to go with aftermarket and not Oriellys or autozone but cost may lead to Oriellys

I'm going to have to probably have some new rotors when I need a brake job which is in the very nearest future. Anybody got any ideas on brands or companies. I'm having a hard time finding both on the rotor. I can find drilled and slotted by them selves but not together. Also I came across...

Well thanks for all your helpful suggestions, most towards rebuilding it. I spent a lot of time on Larry B's website since viewing the posts and even called him today with questions in which he cleared right up. I didn't know it was so easy to rebuild the starter. 70 bucks and my starter will be...

I think my starter is giving up and was wondering what brands of starters are recommended. Also how much is the cost? Thanks!!!

Ya JR I did install the support brackets that came with it. in relation to you cross eyed comment, I could probably go cross eyed. lol :p

So a lil update here, I finally bought the power mirrors from Genos that are Kool Vue brand. one thing that i noticed is that the mirrors do shake pretty bad when driving. :( The mirror itself shakes and i noticed that the pivot is more lose than the stock manuel tow mirrors that i took off...

So its been awhile since this post was started and I still haven't done the swap but I finally got to where I can purchase them and install them. My question now is, will I need a relay, fuse etc. for the power function of the mirrors. Im pretty sure that I will need those components for the...

#1 I am finishing up replacing my evaporator core (A VERY BIG JOB) and was wondering if I needed to add any oil if any to the system when I go to recharge it. #2 My dodge book says 2 oz. Also what viscosity oil do I need low, medium, high??? The book does not say that unless ive missed that...

Alan, thats awesome, thanx for reminding me about Genos, i totally forgot about them Because the evap core is 345 and the heater core in 175 from the dodge house. I believe u might of answered this question but i want to make sure my theory is correct, whats the reason for dropping the...