Recent Content by Austin1985!

Thanks bud! I actually got it out and put another screw in it. Just took some pliers and moved it back and forth and it came right out. I didn’t see a cap on it but i got it out. The old screw got bent somehow. Everything is perfect now. I do appreciate your help!

I appreciate the help! I’ve been studying these pictures and everything is set up correctly. How does one get the TPS to travel more than 59% if you can’t mess with that screw? The screw is what’s stopping it from going further. I do believe the previous owner did something as the security wire...

Well I was just looking at it more carefully and found out that my “high idle stop screw” is out too far only allowing the TPS to be at 59% at WOT. I just bought the truck so I’m tinkering. Lol. Not sure how to turn the screw in a few turns to get more travel cause it looks like the head of the...

Everything seems to be fine as far as I can tell .When I disconnect the rod from the pump bracket and move the rod by hand the TPS will go to 99%. When I put it back together it’s only at 59% and won’t hit the stop so I can’t get WOT. Not sure what the issue is at all lol. Maybe something with...

Hi guys, my first post! Anyway I have a 98 Dodge 12 valve automatic transmission. I am having issues with the throttle linkage. On my scanner the TPS is reading 59% at WOT and about 6.7% at idle. I took the tps sensor off and with a screwdriver I verified the tps is showing 99% at WOT but when I...