Recent Content by Ball54

I am considering using Cummins Restore Plus in the cooling system because of some corrosion and I would like to hear peoples experiences with the product.

My fuel pump is only 2" from the transfer case so that might be the problem. I could make a heat shield. Do you think that would cure it. 2004.5 2500 4X4 SLT Quad Cab SWB 48RE 3.73LS Banks cat back Ex.Raptor 100. Chrys.Svr duty filter. GDP 2Mic.filter

I don't have any in cab gauges yet.My fuel press.gauge is a mechanical gauge on the side of the stock fuel filter housing.I spoke with a fellow a local shop that does work on diesel pickups and he suggested 1/2 inch line and getting rid of the banjo bolts on the fuel water separator.Probably be...

A couple weeks ago I went on a 250 mile trip running lite.With a full tank temps in the lower 70's and no A/C on at the turnaround point the press. was 14psi.I thought FS1001 had solved the problem.Return trip temps.were above 80 so I turned on the A/C.Back at home the press. was 7psi with 5/8...

Forgot to mention the tank vent is OK.

I installed a Raptor 100 lift pump last year and have been having pressure loss problems on warm days.Idle press. is set at 15psi when the engine is cool.On 80 plus degree days I've seen the idle press as low as 6psi.when the engine thoroughly warmed up.When the truck is parked I've checked...