Recent Content by BenCole

I installed the Vulcan Big Line Kit, and it really helped. My in tank pump only goes up to 8 lbs of pressure. With all the banjo bolts, pressure was very low (1-2 lbs) under acceleration. The Vulcan kit helped tremendously, and now I see 5-6 lbs under acceleration with the big line kit. It was...

Thanks for the picture. I was able to take lens out and inspect the new bulb much easier. When I turned on the parking lights, no change. Parking half of bulb lit up (that was a good sign, I think). This is all on the right front lamp. Will check the back light to see if it is partially out, it...

Cleaned contacts in front. Checked new bulb with multimeter, and it checked out ok. Could it be something with a back bulb? They are much easier to change. Anyone have tricks to changing the front turn signal bulbs. I had to remove the battery box on the right side to get to it. Have a bumper...

Replaced front turn signal bulb, still doesn't work. This side blinks twice as fast as other side (what would cause fast blinking?). Back turn blinker works on this side, while the other side works front and back. Where else should I look? Would the turn signal relay be bad for just one half of...

Thanks for the reply. Tonight I purchased a hand vacuum tool, with gauge. All my lines check out, hold vacuum, no leaks. I did replace the one way vacuum valve (2 feet from vacuum pump), it was leaking. I haven't had a chance to start it up to see if that was the problem. I don't think it would...

I have a problem with my 01, also. The heater works fine, warm or cold air, and the blower motor works. It is stuck on the air exiting at the floor (blows good air velocity). I can't get any air on the defrost, and very, very little out the main middle vents. Have replaced the mechanical...

Ps/mmo 16 oz. Powerservice with 8 oz MMO.