Recent Content by Big Red 2006

https://youtu.be/RiYt2YzxP4c I had the tensioner replaced and now im having this noise. Could it be the water pump going out?

Well, think i found it. Maybe G121 or G120, will need to take another look.

Can anyone get me pictures of their engine bay to compair?

I took both bolts off and tried to push it in. It only made it half way to the ridge. Not sure if it needs to go all the way. Was only able to get 1 bolt back which makes me think the line is bent from who ever previously installed it.

While trying to find a oil leak i came across this. Does the tube need to be inserted to the ridge or just till the o ring is covered?

I lost my fuel filer drain hose. Can anyone tell me what ID size i need to get as a replacement?

So i bought a truck (2006 5.9L) that had its engine replaced with a crate motor. While trying to chase down an oil leak i notices how sloppy the reinstall of the wiring harness was. I think i found 2 grounds and multiple other harness clamps that are unsecured (see pics below) and the crank case...

Thanks all, that makes sense this could be a 4 pin connector.

That helps.....however, all 8 wires going to the connector are accounted for. Not sure what the additional 4 wires are from or for.

I think i found one i could reference. Cant completely read this. Can someone explain the 3 highlighted items and what they mean?

Thanks.....It doesnt work with Firefox either.

The truck is an 06 mega cab, whats weird about the wiring is it all looks stock. It goes to a plug that plugs into the 7 pin connector. Also, i believe i have a bad relay or TIPM for my passenger side blinker light. Still trying to figure that out as well.

So i bought a truck and have found a few issues. While taking care of another i found this. Its the wiring going to the trailer hook up connection. Can anyone tell me if theres an issue or should i just tape it all together and not worry about it. Im not very good at electrical work and would...