Recent Content by BILTIT

I run the same as OZY. Great lights, having some issue with water getting into a connector and having brights come on by themselves but i think its due to placement/orientation of module/connector more than anything.

I have these in my 03, fantastic. https://shop.retroshop.us/ProductDetails.asp?ProductCode=06%2D08%2ERETRO

www.genosgarage.com/product/dorman-dark-gray-window-switch-bezel-76114/interior-replacement-parts

What year of truck?

I run a tater turbos 62/65 he341 in my 03. Basically a stock housing machined for larger wheels. Works just fine.

So you replaced a line? Did you make sure the orings came out with the old line? Had a similar issue and found the oring from the line still inside the steering box port.

I run my dual bag control unit in the triple guage a piller pod mount. I use this one: https://www.airliftcompany.com/products/compressor-systems/loadcontroller/

Not sure really, any one should work.

Local parts store, replace the resistor aswell.

Some info here, i might look into these part numbers as i need to replace mine aswell. https://www.dieseltruckresource.com/forums/3rd-generation-ram-non-drivetrain-all-years-101/new-improved-weather-stripping-148126/

Stumbles or just doesn't produce much power (similar to a dead pedal)?

1AAuto are pretty good, customer service is really good. I installed a set of the the 4th gen heads on 3rd gen mounts mirrors with the signal light about 8-9months ago. My driver side mirror has started to vibrate, i contacted them and they are sending out a new replacement set. It took me...

Go for it, be a good comparison. EMF has some videos with their test BJ's at 100k kms and show minimal wear. Find them on youtube.

A little video from EMF, the balljoint you should be putting in your trucks.

So basically, I should stop using my remote start and idle up anytime I cold start. I will be filling my AC shortly again.