Recent Content by Bob95065

I have the NV4500. Yes, there is a damper on the yoke.

I don't have driveline vibration. The truck drives smooth.

1997 4x4 5 speed extended cab

I fixed a leaking end cap on my rear driveline yoke three years ago. Link here: http://www.cumminsforum.com/forum/94-98-powertrain/244736-driveshaft-yoke-leak.html. It is leaking once again. I am considering pouring epoxy into the yoke to seal it off. I am concerned about epoxy breaking off...

www.rockauto.com

Apologies for digging up an old thread. There aren't a lot of people who have done this successfully that post. I have a friend that successfully mounted a York compressor the way you did. Before he mounted the compressor he blocked the oil return with a set screw to prevent it from pumping...

Yes 265/75R16. I went up a tire size which hurt my in-town and towing mileage.

ALT+0176 I have a 1997 4x4 5 speed with 3. 55 gears. Lightly loaded I get 23. 5 MPG on the highway. In town it drops to less than 17. When I tow on the highway it also drops significantly. I am planning a trip to help a friend move at the end of the month. I will pull a 6x12 U-Haul trailer...

It is too late for me... . save yourself!

Your truck is super clean. The carpet looks new. My truck had a very difficult former life. It was abused and neglected when I got it. I replaced many parts to make it a reliable vehicle. One of the last things I want to do to it is replace the carpet and clean up the interior. I got a couple...

I have it figured out. Carlson sells an adjuster hardware kit. I replaced the adjuster hardware and the problem went away. I can drive my truck again! I find this very strange. The star wheel and springs all seemed fine when I put the brakes together all this time. I am not complaining, I...

Thanks for the suggestion, I do appreciate it. I'll try beveling the edges further.

I checked the radius per this thread: https://www.turbodieselregister.com/forums/showthread.php?77049-Rear-Drum-Brakes-Shaking-You-Up&highlight=Drum I had even contact all around. Both the Centric and Napa shoes were tapered on bothe leading and trailing edges. I spent some time...

I didn't say that I thought I may have bad hydraulics so I changed the rubber hose from the frame to the axle, the wheel cylinders and flushed the fluid. I checked the brakes against the FSM and used my friend's 96 which is original. He bought it new and never changed the rear brakes. We put...