Recent Content by cgreek

My scanner will erase the error code but not the error code in the Seamens Actuator on the transmission. I was at a Les Schube on the way home and they tried to clear it while I waited for tires and it would not clear ether.

Sorry for the mistake. My 2004 was stolen!! I am working on a 2005 and yes they call it a motor or actuator bolts onto the trans and has one harness plugged into it. I was thinking maybe the harness also but an not able to get to it today. But do you know a way of resetting error? My tester will...

My 2004 3500 4x4 with auto transmission would not down shift correctly to any gear and had error code P1751, p1753. I replaced the TTVM while the negative battery post were disconnected. After the TTVM was installed I connected the batteries and turned the key switch on for 30 sec. while having...

TQ is a good thought. I was not sure what it normally idled was until the next day when it worked ok. So I was confused also, for it was the same as when it had the problem. The problem again: I had to hold the brake hard at a stop to keep from going forward. But to have it run ok the next day...

Bought a reader yesterday and found not error codes. Started it this morning and it ran ok? But I read 750 rpms yesterday when it seemed to run to fast and today it is at 750 but is running ok. So I put a cleaner in the fuel tank and a new fuel filter and will see if the problem come back. Have...

Sorry It is an automatic transmission and the rpms ae the same whether in park or neutral. I have no updates or mods and i have yet to by a reader for the codes..my first problem with the truck..other than that all i can say is it is a 4xe 3500 long bed swr

I have a 2005 Dodge Cummings 3500. While driving along the road the engine would not idle down when I stopped at a stop light. It will not idle under 800rpm. This is my first post so I hope I gave enough information Cgreek