Recent Content by CSchmidt

If anybody wants to know, the blue dodge in the bottom pic has hit two deer and the white dodge has hit 4... none of them under 50 mph... the worst thing that has happened is that we had to stop to wipe the blood off the head lights!! :)

I make them... it's my side business that I started last year. I'm still working on getting all of my jigs made, but if you're interested let me know. Send me a personal message.

Check these out... it takes much more than a deer to hurt these!

I have an '06 2500 and put a smarty programer on it and I would like to put a set of column guages in... any recomendations?

If your driving in very dirty conditions your radiator and condensor may be getting plugged. I drive in a lota dirty conditions and I have to blow everyting out from time to time to get everything cooling again. This would be cheapest thing to try first

They told me that the return flow was way out of spec. I figured that they would have changed one or two that were messed up... but they went ahead and did all of them.

My 06 had a really bad chattering sound comming from the motor when I would get on it or especially when I was pulling a load. I took it to the dealer and they said it was a fuel issue and I needed to add more injector cleaner and drive it harder... well none of this worked so I took it back and...

Pull the A-post panel off on the driver's side. When you get it off I believe the yellow and blue wire is the one you want. You might check it with a test light, but I'm pretty sure that it goes to the dome light. You can run your wires up throught the rubber gromet by the drivers door and then...

I am making all of my bumpers out of steel at the moment. All of the pipe I use is 11 guage rolled round tubing and the plate in the uprights and mounting brackets is 3/8" thick. On the full bumper replacements I use 1/8" diamond tread plate too. My grill guards are heavier built than most...

Im getting $1200 for one like that and $1300 for one that goes around the head lights. My only problem is that I'm still in college and I only have the weekends to build these. I have been wanting to do a full bumper replacement for a 2nd gen but haven't had anybody interested. However, I think...

I have been making grill guards and full bumper replacements and I'm thinking about increasing my production if I have a strong enough demand. These are HEAVY DUTY and have proven themselves with numerous deer impacts, ect. I have attactched a few pics... please send me a private message if...

My 06 does the same thing... especially when i'm pulling a load or accelerating. The dealer says it's because it idles too long and that i need to drive the **** out of it... so i put injector cleaner in it and did just that. The knock is still there. My buddy has another 06 and it did the...

You were talking about the girl... right?!:D

How does your smarty do on fuel milage? Does it actually help any or just read high on the overhead monitor? I'm still debating on getting one put in. :confused:

Have you figured your milage with a calculator or is this what is comming off of the monitor in the pickup? I tried a bullydog in my 06 with about 40k and a bullydog air system and it didn't help my milage at all... the monitor showed 22-23 going 78-80 mph but barely pulled 15 with it when i put...