Recent Content by CUnger

I am finishing up a first gen 6bt in an M715. The orig cable is about 4 inches too long. Does antone have any insight on a shorter cable with the same ends? thanks

Thanks again. You answered my question.

Thanks, I think the vac pump has 2 nipples and I was wondering if those 2 were connected with a hose tee and then up to the booster.

I pulled the 5. 9 out of a 91 w350 and am not sure how the 3/8 dia. hoses coming from the vacuum pump to the brake booster were routed. Can someone enlighten me . Thanks for any info. 67 m715 cummins .

thanks grey wolf

I have a project I am working on and I need the center to center dim. from the clutch pedal hanger pin to the pin that the clutch master hooks on to. thanks Chris 1967 cummins jeep

Is thr fan clutch left or right hand thread? thanks

Thanks for the help.

The alt has a small box in it that has a cable that goes to ground and then back out of box 4 or 5 feet where I cut it and got rid of donor truck before I could track it down.

This cable is like a #6 cable like a small car battery cable coming off the alt.

I have a few questions about my 91 5. 9/getrag/205. I pulled this out of a 91 w350 truck that was beat up. Its new home is going to be a 67 m715 jeep. I hear a lot of talk about "computers" and I wonder if I will need one in mine? I was also wndering about the cable coming off the alt and what...

Does anyone have any idea where i can get a front and rear seal for a getrag 4x4 ? thanks.

How much and what oil should i run in my getrag and 205? 91 w350 drivetrain. thanks in advance.

I would like to know if i can install a piston type pump in place of my regular transfer pump. 91 dodge truck engine has a bad pump and i have a free piston style pump off a piece of equip. thanks