Recent Content by DeckplateDiesel

Thank you for the input. I used "Standard" injectors Part #FJ932. It's an automatic transmission. I will test run per advised and see where it stumbles most. I will also drain the fuel system as mentioned. Do you think bad fuel would cause that white smoke effect? Do you have any diesel...

Thank you again for the response! I will get that tool and run the compression test! I found the intake grid heater to have no power. The relays are only receiving 3.5 volts from the ECM. Is that normal voltage to switch those relays. I have 12 volts from battery, but not passing through relay...

Thank you for your speedy response! It is all the time, but worse when cold. It does get better as it warms up, but at certain RPM ranges stumbles. Do you have a recommended compression testing tool? I see there is a Mityvac tool Part #MVA5601 that appears to be for this engine and is used in...

Hi all, I would really appreciate some help with this issue I'm having. I am working on a 2003 Dodge 2500 with a 5.9 Cummins. 229,000 miles. Initial complaint was a really rough idle and lots of white smoke. I did a cutout test. All 6 cylinders fluctuated at idle when I cut them out...