Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
TDR Magazine subscribers receive more than the magazine! You also gain additional forum privileges!
Details here: TDR Privileges
Subscribe to TDR Magazine here: https://www.tdr-online.com/
You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
Recent Content by DHostetler
Attention: TDR Forum Junkies To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.
Escape 5th wheel. They can put different axles under it,but it only raises it 2 5/8 and that's still isn't getting me close. That puts the pin height right around 47 1/2. If I put 16 in hitch I'll be in the neighborhood of 54 inch
Yes,all stock. 2002 6speed ho with trailer package is putting my bedrails at 58in. It has what looks like 5 or 6 in lift under rear springs that I guess was part of the trailering package back then
I have a 2002 4x4 6speed and want to put in 5th wheel. Having problems with truck being too tall for kingpin height. Truck is stock suspension. 6 speed 2500 4x4 has bedrail height of 58 inches. I am looking at trailer that can have pin height around 47 inches,maybe 48. Not sure how to get height...
I run 10 psi under tire specs. The originals barely got me to 50k. Then i went to G/Y Silent Armour and ran 10 psi under and just had to replace them at 129k. So i am on my second set of Silent Armour starting at 129k. This has been the best tire i have put on a truck.
I have the same truck,and the same problem. I have no codes in the pcm,and my fuel pressure never goes below 11 psi. I have also noticed when this happens that you can not hear the turbo trying to spool up at all, and no power. I have the 6 spd. and if i downshift it will pick up and go like...
went on vacation over the past 2 weeks and pulled my travel trailer and noticed that at times if rpms were not over 2k the truck lost power and the turbo could no longer be heard. started listening and noticed every time this happened i could no longer hear the turbo whine. it has been...