Recent Content by Dishman Dodge

I totally understand, Joe... worst trait I got from my Dad, when my mind is made up on something, its MADE, and ain't nothing gonna stop me, and I want it NOW!!! but if you guys need a spray-in liner or anything, just let me know and i'll hook you up. -Josh

Glad to hear you guys found him a truck, Joe!!! -Josh

you're welcome... good luck!!!

its all the same... we have a custom built t-rex replacement front and rear bumper on a truck on the showroom, a topgun front bumper on another 6. 7l on the lot, and there is no additional work than on a 5. 9

Wolfy, In case you didn't get the message yet, I verified this w/ our lead tech, and he is in total agreeance w/ RGrizzle, I would replace the fuse w/ a 2 amp fuse, and probably let the service manager who you will be talking w/ know about this. Talk to you soon, -Josh

Terry, I just ran your VIN, and Dealer Connect came back w/ these results as far as possibilities based on a P242: P242B-EXHAUST GAS TEMP SENSOR CIRCUIT PERFORMANCE - BANK 1 SENSOR 3 P242C-EXHAUST GAS TEMPERATURE SENSOR CIRCUIT LOW - BANK 1 SENSOR 3 P242D-EXHAUST GAS TEMPERATURE...

depending on the afe kit (either the xp or cx kit) the breather tube literally just gets "shoved" into a rubber grommet in the torque tube portion of the intake. on the one's we have done here, the fit seemed very tight, but if that hole was somewhat too large, it could very easily cause a leak...

45/5500 Springs Here's the pictures I promised, highlighted is an extra spring/spacer on the 5500. The most important difference is the payload ratings. 5500 is from 10,570lbs. to 11,980lbs. 4500 is from 8,150lbs to 8,960lbs. depending on the Cab to Axel and Standard or Quad Cab. Rob Croswhite

Great thread, thanks Cummins I couldn't have said it better myself.

They're going to ride rough, however, you have got to get some wieght over those back tires, before you can judge the ride - try one with a service body. Rob

The 52 gallon tank on the 35/45and 5500 is located were the spare tire is on the non-chassis cab trucks, plus the frame is totally different. I can't tell you that there is not room for a larger fuel tank on the non-chassis cab trucks, and I do agree it would be nice, however, even pulling...

I know the site, and like I said earlier that site does have some shortcomings, however, I built a 4x2 Laramie quad cab and it is requiring me to choose the buckets. It allows for the bench in the SLT 4x2 and in the Laramie 4x4. I'm not sure I'll be able to get an answer from anyone on the...

3,800 lbs.

Stamped wheel capacity is 3,800 lbs.

40/20/40 Available Yes, the Dodge website "build your truck" does have some shortcomings, and so do most be on the job 6 months and go somewhere else sales people. :confused: That is why if you find one that's decent (which most decent people don't stay around the car business) stick with...