Here I am

Recent Content by DPickard

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff
  1. D

    Uh oh lost a bolt in the engine. What to do

    I would try jacking the front of the truck up and draining the oil. It is posible that the bolt will flow to the back of the pan and you could fish it out with a magnet.
  2. D

    Parts

    Since I was working on my a/c I decided to change the dryer and expansion valve and convert the system to r134. I charged the system and my pressures are reading around 230 psi on the high side and 20psi on the low side which is normal. I ruled out the low pressure switch by making a jumper wire...
  3. D

    Parts

    I am working on my 1992 w350. My a/c compressor is kicking on and off and will not let the system cool. I believe that I have narrowed it down to the a/c clutch cycling switch. During this repair and others when trying to get parts from advance, auto zone, or o'reileys I have run into the...
See more
Back
Top