Recent Content by Ducman82

i had that set up. sounds great!

i just had that little plastic worm gear break on my lumbar. going to go see if i cant get that little gear today. ill let yall know.

im running 5" diamond eye from the turbo back..... LOVE IT!

I have yet to go to them here in ABQ, but i have heard nothing but good things about them.

what are a good set to replace the stock shocks on my ram>? im not looking at lifting, just better quality then the OEM ones. Duc

opps, ultralight II. but should work the same way. i know my diprocl gauges came with a little reo-stat inline that i took out as well, and just wired to the dimmer.

i stuck on the custom DTT intake horn. got a little more power, but not enough to out weigh a smarty. .

i wired mine right up to the dimmer, no problems on my end.

i dont "blip" it per say, just gun it then let off and coast, like if i was passing some on a street. i dont just go up and down the road nailing it and letting of the go pedal. checked the end play. dead on. no movement. so i guess im just hearing things. :-)

good idea thanks!

ya ill check the play again. the truck has had the mods for 2 years now, and i have never heard this noise before. sounds like a blow off valve is behind the dash. thanks for the info.

so if i blip the throttle whilst going down the road and let off, i get this, air box ish noise, or maybe a turbo spin down noise that i have never heard before. i took off the air tube and checked the blades, they look fine and no play in the shaft that i can tell. it does not smoke or use oil...

both my rear bleeders broke. i just took the calipers to the local machine shop guys and had them get it out and got some new ones in. 20 bucks later, i bleed the brakes and was done. i hate bleeder screws. the only reason i had new ones (4) was because of that bad luck!

i had to just grind off a little on my cover, very very little, and it fit just fine. it was only hitting on full right turn.

good write up. simple an easy. the only thing i do diffrent is take the skid plate off.