Recent Content by EthanWhite

Hi Everyone: Having an issue with my headlights. Backstory: I replaced my factory switch due to it melting on me a couple years ago. The plug and pigtail of wires was badly distorted but I have affixed it to a new switch. It has been installed for a couple of years. Recently while on a trip...

To update: I purchased a BD Throttle 'Fooler' I think is the name... It has helped the issue tremendously. Do you all have any updates?

Any updates on this (annoying, terrible) problem?

Simply put, I am having this problem with my 13 3500 3.42 SRW Aisin truck. I have turned off the hill start function and recently my dealer did a ECM update. I find the 'lag' extremely frustrating when crossing busy uncontrolled intersections. I would appreciate and follow up you all might...

I'm having the same issue with my 2003. I'm in the midst of troubleshooting it now. Let me know what ya'll find...

probably APPS related.

Question Gary, could a failing apps cause a misfire when at operating temp? Also my cruise acts funny- it you set it, it will gain like 7mph then slowly slow back down to the set speed. I have been told the misfire is either a bad injector(s) or a failing VP-44. I have plenty of fuel...

My repair went smooth, except the repair was a bi*ch, i removed the fender but it was still very tight. MY block was cracked about 5 inches, The method of repair has been sucessful, it still weeps a small amount (like less than 1/2 quart per month), before the repair my block leaked about 3...

To follow up, year ago when I was having this problem, I replaced the injectors with NEW bosch 300HP Marine injectors for the 5.9 ISB used in marine applications. I actually found the best price on amazon through thedieselstore.com. But then again, that was 5 years ago. I paid 300.00 US for six...

What's done to your truck? 4. 10 rear axle ratio?

Yes My truck is also a 53 series. The Previous owner slathered JB weld all over the side of the engine to hide it... But i found a place locknstick industries. LOCK-N-STITCH Inc. homepage: Cast iron crack repair, cast iron welding, thread repair inserts they specialize in col cast iron repair...

Alright! Thanks for the info. I might be headed to the dealer (damn) soon. I wish I had a Dodge DRBII

Great. Thanks for the offer! I know I have adequate fuel pressure ( I have a fass ddrp, and a cater frame rail mounted pump). I am thinking it is more an injector problem myself, because it has gotten progressively worse which doesn't seem to insinuate a electronics issue (seems to me that if it...

Alright what injectors should I go with?

Also the miss is intermittent, it comes and goes and sometimes it won't miss, but other times it sounds horrible, this has gotten progressively worse over time.