Recent Content by fairmont

'99 2500 that did not come with the factory 7 pin wiring. Mopar Trailer Tow Harness K6858192 was installed years ago, but the blue wire for the trailer brakes was never connected. The 4 wire connector under the dash near the parking brake is there and is live, it powers up the controller and the...

Thanks Mike.

Question about adding electrical accessories to a 4th. Gen. From Genos Garage catalog…. The ’06 and newer trucks have a CAN bus electrical system. The truck’s totally integrated power module (TIPM) computer can detect changes in the wiring harness (impedance, current draw, etc. ). After...

Just an update, Truck went back to dealer a few weeks ago and tech replaced a faulty "module". After that was replaced the voice prompts for making changes on the radio began to work and i could get into the setup menu to pair a bluetooth phone, but was unsuccessful in pairing a Blackberry...

Thanks SReeves. Called Chrysler to see if they could tell me anything, they set up appointment at dealer for next week.

Simplysmn, no voice prompt when I press the phone button or the voice recognition button. JMetzger, the mirror appears to have perforations on the top of it, near where it would meet up with the headliner if you pushed it all the way up. The point I was trying to make with the first...

Yep, it has the Nav radio. I don't get any sounds at all when pressing either button.

Tried to link a phone to the UConnect in a 2011 today. The "phone" button and the "Voice Recognition" button do not do anything when pressed. I called the toll-free number in the Uconnect manual three times and learned that the folks that answer the phone there know nothing at all about the...

Anyone know if the Mopar Fog Light Kit 82211694AB will work on 2500's? It requires the dealer to go in and flash the computer in order for the new headlight switch to work. My dealer says the kit is only for 1500's. Here's a link to the installation instructions...

Well, that seems to have been the problem. Advance Auto had a BWD model ABS113 ANTI-LOCK SPEED SENSOR in stock for $35. 49. Everything back to normal. Just seems very strange that I had absolutely zero issues untill the drive home from the dealership. Oh well, at least it was an easy fix.

I'm not able to find much in "Search" here on speed sensor replacement. Is this on the rear differential? How tough to swap out?

Took truck to dealer today to recalibrate speedometer for larger size tires. Everything was fine driving around town. Speedometer matched speed on GPS. Got on interstate and was running 75-80 mph and ABS and Brake light came on. After I got off the off-ramp and came to a stop and took off again...

Well, they fit. Cut the ribs off the bottom 4 1/2" of both ends of the batteries and nothing off the lip of the tray. Did have to knock down four nubs in the bottom of each tray with a dremel. I got to thinking as I was hacking away at the batteries "I wonder if I'm now my own 'Warranty Station'...

That's great! Thanks so much for your help!

Thanks Mishkaya, any chance you could post a photo? Mactruck, what group size are your batteries? The group 31 is 9 1/2" tall, shouldn't need to worry about spacers or cutting off the holddown. If anything, I'm concerned that it might not be long enough.