Recent Content by farrier

Thanks John! As I replied to Scott I`m taking it into a diesel shop tomorrow to have the FASS fuel line replaced. My mechanic said it was pretty sad looking and he fixed the end where it was leaking. The guy mentioned something about a key with the VP44 in regards to timing. I have no idea on...

I don`t know what the key is. I am taking the truck in tomorrow to have the FASS fuel line replaced as it was leaking. I`m having a garage that works on pretty much just the diesels and he did mention something about a key on the pump. I don`t what`s involved to figure this out and since I don`t...

Good morning John. I looked up the PSG and saw that it is the computer part of the VP44. Can that be adjusted or retimed or would that mean I would need a new VP44 if that`s the case. I have an appointment with one of the better garages in town on Thursday to replace the fuel line from my FASS...

Thanks John. I`ll have to find that information again and post it. Hunter had my truck for a few months and really cleaned up the wiring on it. What is the PSG? I wasn`t able to find my post from before and I'm not sure why but I`ll go back and do a better search Scott thank you as well. Crank...

Just curious as I read the link to hot wiring the VP44. The blue fuel line was leaking and my mechanic cut it off and hooked it back up. I`m having it replaced this thursday. Was wondering if that could have caused any air in the line to cause any of this problem.

Thank you for your response. We`ve gone through all the wiring. I posted another conversation in case I was not verbalizing correctly what is going on. I`ll check with my mechanic to see if he tried hotwiring the VP44.Maybe not since the truck fired up and was running. Any thoughts on timing?

My truck is back to running but still having issues with check engine light coming on and tach dropping off and coming back. Throwing codes P0336 and 1690.Was throwing the 1698 code before all the work and truck would not start at all. Rebuilt ECM, trouble pins replaced on plug, new plug to...

Thanks! All tips and suggestions accepted!

Yes exactly! I did the same thing and found some and ordered them. Same price and of course shipping is almost the price of the tools! He was out today to take some pictures and the old ECM the check the sizes. He`s out of town next week so will have the truck towed to his place then and we will...

Hi John. I hope snowmaggedon is going to give us a break here now! Hunter has not been able to get out here to look at my truck for a while now. Plan has been to get the ECM pins checked and he needs this special tool to remove them. I`m hoping you might have an idea on where to get one. Part #...

I got on that site Mopar1973Man and was able to find the W-T wiring instructions. Looks pretty simple to do especially for Hunter. He may have to get to it tomorrow because the north wind is blowing so it`s pretty cold out there with no shelter. I`m feeling pretty hopeful about some resolution...

Is this a different site? I saw the posts about the W-T ground wiring modification and something on here about the alternator wiring as well.

The truck is here at my house. My guy does not have a garage to work in. He basically works for the university but works after hours. He had a knee replacement so between that and our significant snow dump it`s been a slow process. He will be out tomorrow or friday and I will make sure he gets...

Yes wait to yes! wait to start light does come on

Truck not running right now and mileage is just under 300,000. Spring 2021 to the present these are the things that have been going on I was driving in to town and the truck died and I managed to get it started again but all my gauges quit working. Eventually they came back on after I stop a...