Recent Content by FTipping

I have a Dodge 1997 3500 dually. I recently discovered 4 loose bolts on the rear axle hub passenger side all others are tight. lost some oil. Need to know if the seal could be damaged and what may have caused these bolts to come loose, also what torque they should be tightened. Thanks

No it dosen't. It still seems to pull although the faster you go the louder it gets even if you turn. Checked fluid levels all are good and clean. Checked drive shafts to and from transfercase and all seems solid. Thinking Hubs but haven't pulled then to see if they are sticking.

Yes I have. they seem solid . Thought perhaps linkage issue but that too seems good . I am thinking hubs or transfercase but not quite sure how to test either. I GUESS PUTTING THE TRUCK UP ON BLOCK and engageing 4x4 to see if everything turns and too find out where the noise is comming from. A...

New to TDR. First time on forum so I hope someone can help. I have a 97 3500 dually. When I engage 4x4 it sounds like a hub is not fully engaging as it makes quite a clatter. Dosen't seem to make a difference if in 4 low or high but gets louder the faster you go. It still seems to pull. Some...

Hualing Livestock