Recent Content by gegrimes

I kep the factory pillar mount and installed the new pillar mount right over the top of it, my truck has a tweeter mounted in the pillar. I used a Dremel drill, and kept cutting until it the new mount fit snugly over the old, worked real well. With the Dremel, I was able to make small, precise...

I faced the same problems you are facing when I recently installed my guages. I removed the black bezel on the front of the dash (it pops out), loosened the radio screws, pulled the radio out to give access to the wires, and tapped into the hot wire for the radio. You can identify the hot wire...

I own a 2001, 24V with an auto trans. I recently installed a Diprocol fuel pressure guage. Diprocol offers two guages, both have their advantages. I chose the 0-50 PSI version, since it was an easier install, the sender mounts directly on the low pressure line on the block. The other was a 0-30...

I am new to the Dodge diesel family, own a 2001, 2500 4x4. I bought it used about 6 mo ago, has about 38K miles. Am wondering about improvements. What improvements should I make? Which do you consider (a) imperitive (b) optional and (c) just plain cool to do? Any suggestions would be appreciated.

My 01 2500 4x4 has no brake lights. I bought the vehicle used about 5 mo ago, it had an electronic trailer brake unit installed by the previos owner. I first noticed no br lights 1 month ago when hooking up a trailer, did my light check, and found out I didn't have brake lights. I also noted...