Recent Content by Jbremount

I washed my engines bay and got water on the battery and battery box. I waited a few hours to start the truck, but when I did, I got a check engine light and scanned the code of P2121. Do I need to clean the APPS plug or plugs and add dielectric grease? If I pull the APPS plug to add grease...

I bought one Dorman door and did not like it. I then bought the rest from Heater treater. The dorman door is all plastic and not even close to being as well built as the metal heater treater doors. I replaced all "5" doors with Heater Treater doors and highly recommend replacing all as the foam...

Just to add to the discussion. The Smith&Wesson M&P Shield is a great carry/protection gun. It's thinner and smaller than the Glock 23 or 19, but is still very shootable. It is also very concealable, and size really does make a difference, as eventually a larger gun just does not get carried on...

FWIK, the HVAC door/doors failure is a common problem on these Dodge trucks. I pulled the dash on my 2004 truck because I could not get heat. Upon inspection of the factory doors, every door plastic was busted or completed broken in one form or another. The foam was in pretty sorry condition...

Nice! guys, links to the digital issues of the procedures with pictures are here! (Must reads!) (1) http://issuu.com/turbodieselregister/docs/tdr_51_issuu/97 (2) http://issuu.com/turbodieselregister/docs/tdr_52_issuu/47?e=0

I also would like to see the photos! I am just about to start installing new injectors. Maybe you can send them to an administrator and they will move them into the post.

Fixed it! It was the blower motor resister. Darn thing was working before the dash removal, but it's not working now. I stuck in another one and the AC fan blower is working like a champ now.

I just finished pulling the dash and replacing the broken doors in my HVAC box. After putting everything back together, the AC blower motor will not come on! The new door work fine. What could cause the AC blower motor to not work? Did I miss plugging in a wire or something?

I know this tread is getting old, but I need a little advise along these lines. My clutch is holding fine but the throwout bearing is beginning to make a whining noise. I also can see ball bearing(probably from the throwout bearing.. laying on the bottom) when looking under the truck. I want to...

I have been thinking of getting a CB. How are you guys mounting the antennas?

I would not go to the dealership unless you have a money tree in the back yard. Most Stealerships are the same when it comes to these trucks and your pocketbook. The "Jack of all trades Dealerships" usually charge much more for lesser quality work. If they get it right! Most of the trucks...

I had pretty much the same problem with my driver's seat and had a local car upholstery shop fix it for about $120. The areas of bad foam was replaced, bottom and top. The shop had some fabric from a donor dodge truck that matched almost perfectly. Everything looks original. Anyway, I am happy...

This is a very interesting topic! How does the CNC conversion effect the lubricity needed for longevity of the injector on a common rail diesel? It seems every thing points towards adding more lube or having enough lubricity for the injectors to last.

Hello, is tapatalk Apps up and running?