Recent Content by jbz400

Hello, I need your advice on the heat ex changer. I'm doing a full rebuild on trans. Billet input, goerends tc, goerends vb, and goerengs rebuild kit. I live in Indiana and have 170000 on the clock. Now that im down there im doing a rear main and new o ring on cam. I have flex plate off "doing a...

Well I 99% sure it's milliamperes. I talked to the electrician at work and he explained it to me. So basically i put the meter on ma and it reads 2.54. I did this on the neg side. Pulled all fuses and still the same. I then tried the same thing but this time on the pos side on both batteries. I...

So now I'm showing 2.54 milliampes. Does that sound like its normal.

Prairie dog. Hood light was unplugged. I'm going to start unplugging in the morning.

So I had just a little bit of time to try some things. Last night I stated truck and let it run for a little bit. Pulled it in garage and undid neg post on both batteries. Checked volts on both batteries. Both were 12.95. Went out this morning and both were 12.55. I put my 10a multimeter on neg...

So I got a new set of batteries about a month ago. Everything has been good until I let it set 5 days and they were both drained completely. When I opened to door the miles on the dash were flashing on and off and also a red light on dash was flashing on and off. No doors were cracked, no lights...

So I took the edge off and sent the truck to dealer. They said ecm lost vin. They said they flash ecm and all is good. I have been driving about a week or so with the light off now. Just thouth I would give an update.

I have a 04. 5 Today, I was driving. When I shut the truck off, it stayed running. I have an edge with attitude. I unplugged the turbo timer wires, and the truck shut off. When this happened the check engine light came on with code P0607. I took all the edge with attitude off the truck. The...

Cerberusaim, I can tell you know your stuff. Im getting ready to change out my gov pressure solenoid, transducer, and output shaft speed sensor. Are you saying thet its the borg warner gov solenoid that are just as bad as a fractory one. As of right now, who makes the best parts to put in these...