Recent Content by Jeep Hauler

Fixed!!!! Oo. When I went to adjust the bands, I knew right away that was not the problem. They screwed in almost the backed off amount from the original adjustment from the factory, and when I put the in-lb wrench on them, it did not take too much (1/8 turn) to set at the tq specifications...

Update: Pulled the pan off No metal, just a thin smear of sludge on magnet. I took my finger and pulled down on the band sprags or (levers). I could move them down off the piston about 1/2 ". Don't know if this is normal or if it is frivilous info, but I would imagine those need to me more snug...

The stock wheels may be hub centric, but the stock wheels on our rigs also use the acorn style lug nuts to center the wheel. So the stock lug nuts would center the H2 wheel fine. :cool:

I had this posted on another forum and only received one response. Just trying to cover my bases here, and I need to get this truck back on the road ASAP. Thanks for your help!Oo. And I did do a search first with no luck. Truck is sticks in 1st gear... ... ;. Then shifts to drive and...

I was going to when I noticed how sealed it was with silicone. So I did not want to void my core charge. After processing everything I think it came down to a couple things: One of the ECM connectors seemed loose when I was taking it out, which I work in the oil field, and the roads are...

Repaired. After dealing with a very poor customer service at a place that specializes in re-manned ECM's, I finaly broke down and purchased one from a different Dodge dealer (saved $800 at least). When replacing the ECM and re-flashing it, we had to un-plug the ABS module then plug it back in...

OK, ordered an ECM this morning. $695 + free red label overnight S&H. Includes a lifetime warranty, and a 14 day return policy. Oo. I gave them all my engine info & #'s as well as vin, mileage & #'s on the old ECM itself. I have to return the old one with an included pre-paid label back within...

OK, first, I have posted in the 911 section and thanks to the great courtious responses. :cool: My truck, 2005 3500 4x4, will not start, no lift pump activation, nor grid heaters. After towing it to the dealer, according to them, the ECM will not respond or communicate to the scanner. OK, I...

Fried ecm? Dealer says the scanner will not communicate with the truck. They "think" the ECM is fried but no gurantees. New ECM is $2300 including the flash. Any other ideas to double check? Everything the the truck workes electrically except a no start (cranks over OK), no fuel pump & no grid...

OK, there is a large 20A draw coming off somwhere. I checked the fuses and grids, but can seem to find it. I just hauled it to the dealer and they are going to do a diagnostic. Supposed to be under $100 for this, so I will post up what they find. Thank you for your replies. Danny

This is a big deal for me since I use the truck for work, & I need it to run, and I am on call this weekend... 2005 Dodge Ram 3500 4x4. OK, in order, events that took place: A few days ago the truck stumbled momentarily, set a code of 2146, belched a little smoke and then ran fine. No...

P2146 Fuel Injector Group 1 Supply Voltage Circuit. Showed up today with a stumble. Drove another 50 yards and the truck ran normal again. Now the code will not go away. I unhooked the battery for a short period (few minutes, not long enough?) and the code is still there. Truck starts and...

MP-8 drawing Please enter my name, I'm in!Oo.

Entry for Wilson's Intake Thank you Wilson for the opportunity to test a product and thank you Robin for making this painless... :) I have two Dodge 5. 9's The first is my work truck/daily driver 2005 SLT 3500 4x4 QC SWB. It is currently stock except for the Firestone air bags & 35" BFG...