Recent Content by JJecker

Thanks guys for the input. After I get the truck I might see if I can find the control wire. If I have any luck I will post the results.

I have a 2012 2500 4X4 Crew cab 6'4" bed with the Laramie trim package on order. Does anyone know how to disable the chime that sounds when the key is left in the ignition and the drivers door is opened? I found a post online for a 2005 but nothing for 2010 or newer.

Thanks guys. The heater hose connection was the problem. Have a great holiday season.

2006 2500 CTD with 48Re and 44,500 miles. I have coolant or water dripping out of the inspection cover at the bottom of the bell housing. Is there a freeze plug at the back of the engine that could be leaking?

Jeff, I have found only one adjustment screw. It is the one I described that is located behind a rubber flap that is connected to the headlight assembly and goes over toward the plastic grille. Raise the hood and pull the rubber flap forward. About half way down the assembly you will see...

Jerald There is an adjustment for vertical. Open the hood and look along the inside edge of the headlight assembly. the hex head socket is located behind the rubber flap between the assembly and front grille. Hope this helps