Recent Content by jmhill

sounds like my experience to a degree--first banks unit was replaced, as it was toast--had problems getting the 2nd one to work--same run-around--check sensor/ring, prox. of wiring to pcm (induction??)--finally got it to work, and it worked well--installed banks products for customers in the...

my truck is an 06 3500, 6 spd, 37K miles--accessories that interface/interfere with the PCM are a banks economind system and a pacbrake exhaust brake--I recently upgraded the compressor for the brake with a viair 400 series, using the original wiring, relays, switches, etc supplied with the...

right you are, bob--thanks--soldered my switch leads, covered with shrink tubing, re-taped bundle--can't be seen unless you remove the lower dash panel--works like a champ--thanks again john

Help!! I want to wire in a anti-theft switch to disable the starter on my 'o6 3500. Issue 53 page 36-37 says that the yellow wire in the bundle from the key switch is the one I need to wire the switch in to. Problem is, there is no yellow wire in that bundle. There is a white wire with a yellow...