Recent Content by JMRinehart

I have a pin hole leak in the rubber fuel line. The hole is right above where the metal line and rubber line connect. It squirts out like a pulse at idle and after i leave the truck off overnight it wont start without me stomping on the pedal because the line drains out up to that point where...

Alright thanks this is helpful. Do you know the location of the relay or what it looks like? Someone said its on the firewall behind the brake master cylinder but i can't seem to find it.

I just got a new solenoid and relay for my truck. but I dont know where to start or quite honestly what to do. So if anyone knows of a site or somewhere where I can find removal and install instructions that are step by step. Or if you can lead me through it step by step would be much...

Alright, will do. thanks for the help guys

in order to start my truck i have to push the spring underneath the solenoid up to where it locks. this is with the key in the on position. the spring under the solenoid wont lock by itself. what should i do to trouble shoot this problem? new solenoid or can i fix this one?

is there an iat sensor on the 1995 12 valve 5. 9L? if there is one where is it located?

I don't know if the leak is internal or external, I took the truck in to a aamco to get my transmission checked on because i just had it rebuilt. and their mech looked over my engine as well and just said my injectors were leaking.

need help figuring out if and what is wrong with my transmission. I have a '95 2500 with an automatic transmission. I have a gauge that supposedly reads my egt, boost, and transmission temperature. when the transmission is cold (between 77-95 degrees) it shifts fine, no problems. but when it...

My injectors on my '95 cummins are leaking. What should i do to correct this problem? should I replace the injectors all together or is there something else i could do to fix it?