Recent Content by keevinzanejohnson

As anyone with an 03 cummins with a NV4500 probably already knows finding a clutch will drive you to insanity. I have found a clutch that I may buy but I dont know if it will work. Since my pickup has the NV4500 five speed I am having a hard time finding one. Most of the clutches for the 45 are...

Dodge Cummins Pro Gold Performance Clutch Kit - LuK I am trying to find a reasonably priced clutch for my 03 3500. I have the nv4500. I have been searching for hours and stumbled apon this clutch. Does anybody have any info or suggestions? And My pickup is averaging around 500 horses so I just...

I will try it and see what happens on stock. And no I dont have a gauge on it.

I changed my cp3 about two weeks ago and ever since the pickup runs but still is a little rough. To me it sounds like i have a bad injector. At low idle is has a little pinging sound and when you get on it at high rpms it will pop like a backfire when loaded. Can anyone help or just give me some...

I changed my cp3 about two weeks ago and ever since the pickup runs but still is a little rough. To me it sounds like i have a bad injector. At low idle is has a little pinging sound and when you get on it at high rpms it will pop like a backfire when loaded. Can anyone help or just give me some...

I just recently replaced with my original cp3 with a custom built by shane at wicked diesels. But I have a few questions. I know I atleast have one injector that isnt firing right. So can I just change out the nozzles and be alright or do I need to replace the injectors as a whole? 03...

The pickup is an 03 3500 5sp. Diablo sport predator programmer, s&b intake, 5 inch straight exhaust. I have yet to call shane back but I will do. Zane USN active duty

I just replaced my blown stock cp3 with a modified from shane at wicked diesels. My pickup is throwing a code 0602 Control Module Not Programmed. Does anybody know what the problem could be and help me out. The pickup runs pretty good but I know I also probly need injectors because the pickup...

Im engaged myself so my advice is... Just never leave a fight unresolved. Working your problems out together will only make you stronger and grow together even more! Believe me! Im in the military and being away makes things hard but not talking about problems makes things even harder! Just take...

Come on fellas. Im not that stupid. I know its a high pressure fuel pump. But Im asking a simple question. I was a cummins mechanic for 6 years before joining the military but I worked on 12 valves. NOT 24 or the common rail. I just need to know if I need to pull the pulley or can I just pull it...

pump The pickup is an 03 3500. cp3. But will the gear pull out of the rear end without taking it off? And if it will what precautions should I take?

Anyone know how reliable the wd mod cp3 is? I am replacing my blown cp3 on my 03 3500 but I am still worried that my stacked programmers and injectors if the pump will hold up? any info?:confused:

I have just about tried everything i can think possible to narrow my problems to something other than my injection pump but i now have no other options. I just bought a knew one but replacing it is a problem. Do I have to remove the gear from the pump or can I leave it? And I had shane from...

You wouldnt happen to know anybody that used to live in merkel named mitzi robertson or eddie johnson would you?

Im not looking for chrome plating shop. Im looking for chrome shops that have lights and light bars, bumpers stuff like that