Recent Content by KTM2Smoke

When the nanonet filter came out back in 2013ish, many thought the stock 2010-2012 in-tank pump would be insufficient to pump through the nanonet. Add a severe duty filter kit, the pump would be even more stressed. Was all of this just marketing for after-market filter and pumps?? All these...

I like the idea of the easy access spin-on filters with the fass setup. But I've had good luck with the OE setup. Maybe I'll keep it OE.

Thx for the input. Not totally sold on the FASS setup. Just considering FASS. I still have the original in-tank pump with 120K miles. From what I have read, its days are numbered. Hoping not to get stranded on a long trip.

Will do. Thx.

Thinking about installing the FASS Titanium Series Fuel Pump/Filter on my 2012 2500 sometime soon. Curious if anyone has routed the fuel line from the FASS Pump/filter setup to the engine compartment fuel filter housing that came stock?? The FASS instructions say to route from the FASS pump...

2012 Ram 2500 6.7 Cummins

I recently had a weak battery that produced intermittent electrical issues (throttle valve light and something else that I can't recall right now). Replaced both batteries and everything went back to normal. I know this doesn't address your friend's issue directly, but I learned after my...

All stock. Dash never been touched.

The truck has just under 120K miles. Starting around 50K miles, the noise was barely audible and would show up just once in a while. Its gotten worse over the years and is starting to get annoying. Fortunately it is not noticeable unless you are sitting in the driver seat.

My 2012 2500 SLT has an intermittent vibration noise that occurs mostly at speeds above 50mph. The sound seems to be coming from behind the speedo/tach gauge cluster. Sounds like a worn cable inside a flex tube kind of like the old speedometer cables from long ago. Guessing these cables...