Recent Content by Levi1a

Like the tittle says 16 cm exhaust housing for a h1c turbo. Housing only. Located in crossville tn 80 bucks shipped. Call or text 931 787 40 one seven if interested.

I actually talked to PDR and they are now selling the 4 hole 190 s. And that was my concern. Anybody know where to get the 5 hole 190s without custom nozzles?

Alright I know this is a dead horse, but I have read every injector thread on the entire intraweb. I want a very slight increase over stock, capable of staying cool while towing. I think I am more unsure of what to do now after all the research than when I started. I have it narrowed down to...

Already running synthetic 5w-30. 5 quarts. Maybe try a different brand like am soil. I think the get rags are just slow shifter by design.

Kind of in the same boat. Just had my Getrag rebuilt about 2000 miles ago, and now notice grinding when upshifting into 4th. It is mainly when I try to shift quickly and is more prominent when I am over 2000 RPM. If I pause in neutral for a second it wont grind. Just kind of sucks when you are...

Now ya tell me.....:D Got the rebuilt unit back. Installed on the 4 banger. Runs nice, fires right up, and no leaks. Little smokier than before, but I would imagine the injectors are well worn and popping at a low pressure.

I just installed a box brace on my truck I picked up from a member on ramchargercentral. Same part as what dodge connection sells. Like DVolk said no holes have to be drilled. In the 4wd position there will be one hole on the brace that is not used. It is the one directly behind the box. it...

Ended up sending it to City diesel in Knoxville. Full story on the pump was it was leaking around the big O ring in the head. I decided I would pull it and replace it myself figured worse case is it would need a rebuild anyway. When I put it back on and started the truck it hit runaway :eek...

I was able to piece together a new OEM SACHS clutch kit by shopping around on fleabay. Probably have about 300 bucks in it all. I got the new big heavy cast iron pressure plate and a 13" disc off of fleabay. New Sachs throw out bearing and pilot bushing came from rock auto. It holds pretty good...

Thanks for the replies guys. I have a local shop in Knoxville that I have never used before, but I think they do service work for the big rig shops in town. They quoted me 7-800 to rebuild my pump which seems fair. Oregon and Industrial injection both quoted me 1000. Nobody had any cores they...

Posted on 4bt swaps, but thought I would post here too. I got a ve44 rotary on a 4bt that I need a rebuilt unit for. Was hoping to order one and have it shipped and send in a core vs. waiting on having mine rebuilt to save time. Only place I found that looks like they have them is Oregon...

If you have never turned it up don't. The quest for more power is a slippery slope.............:cool:

After all my tuning and tweaking on the truck I was left with some turbo chatter at low RPM high boost situations. It was very controllable until I though I needed to do a little grinding on my fuel pin . :D Unloaded I could drive it and keep it under control with my right foot, but I hooked a...

Well crawled under the truck the other day and it looked like the trans mount bushings were a little crappy so today I threw a set of bushings at it and it actually seemed to help with the noise. Gonna give it a few days of run time before I call it fixed but so far so good. May go ahead and...

Found one. Thanks