Recent Content by MarcStanley

update: The major leak was coming from the o-ring not being set correctly by myself on the lift pump. Now it no longer leaks like crazy just a few drips coming from that line circled. Where does that line go to up in the engine? Could I cut it back off from that end and just run a rubber line...

I took all 4 bolts out to take that pump off. Does it split in two in the center there? Because that almost is what looks where it is leaking from because the top of the pump really isn't wet like it is coming out of the where it attaches to the filter housing. It didn't start to leak real bad...

the other day after changing out a leaking transmission line I noticed a small diesel leak. Looks to be coming out of the fitting circled, the return line? Tried to take the fitting off and couldn't get it, although I didn't try real hard. What are my options here get another solid line? Replace...

here is what I pulled off from the back of the compressor. One of the o rings is worse then the other.

Thanks guys. I pulled off the lines at the compressor today and one of the o rings was shot. Does anyone know where to get these o rings? Will NAPA have them? Hopefully that is where the leak was now all i have to do is get someone to evacuate the system and then refill it.

Went for a drive down the thruway today, first warm and sunny day of the year. Go to turn on the AC and no cold air comes. Air continued to blow out of the panel vents it just was not cold. The air was warm on both the pass side and driver side and both were the same temp, warm. When I stopped I...

"Stroke This!" in the power stroke font

Yea i'm in the same boat as you. When i take the wings off my plow it feels like a baby. Only did it a few times, those boss wings are heavy, but worth every penny!

... . Sorry, don't know what to tell you other then call a dealer.

A 7'6" plow on your truck is a waste. The one thing Blizzard does well is the power plow. I would wait to put either an 810 or even an 8611lp on your truck. You should be able to go to Blizzards website and get part numbers for mounts to compare between plows and truck brands.