Recent Content by Motorhead

Yeah...But I bet your '06 is Paid For! What's the price of a well-equipped '25 HO?

I am running to maybe a problem with this truck. The Raybestos 7040R rotor and hub assembly states that it is for a 3300 pound front axel. I looked at the VIN tag and it shows 4,000 GAWR for the front axle and rear axle 5450 GAWR. Is this the right rotor/hub assembly or is there another one for...

Thanks endoscott. my concern is that the rotor will be too thin and then warp causing a come-back. I looked up on youtube and the hub and lug studs need to come away from the rotor. I will sometimes, after a rotor to hub change, check the rotor on a brake lathe to make sure it is true.

I'm working on a NICE 1993 D250 2wd Cummins powered pickup. The front brakes are ready for replacement and the rotors have some wear on them. Truck has 224,000 miles so I doubt that the rotors are the originals. Here is my question: Does the replacement front brake rotors come with the hub and...

You might want to post your "want" in the classifieds for fourth generation trucks or post in the fourth generation forums.

I have seen those overhead "creepers". Fortunately, the truck is a stock height D250. I have pretty much retired from most of my car work otherwise I would probably buy one of those. This guy that owns the truck, I have been working on his stuff for a lot of years. The truck is a real clean, low...

Thanks! The assembly looks pretty straight forward. It's just getting my worn out old body up in there to do it. I'm 72 and ran packages for UPS for 30 years. My back is fused from L-1 down to L-5. I don't see any issues other than it will take me a little longer than it used to. Thanks Again!

RedD250, Thaks for the link. I just ordered a set from them. Thanks!! Chris

The BLACK slime is an algae that grows in even non bio diesel. You need to use a fuel compatible herbicide such as Biobor. Biobor Fuel Additives

brucejohnson, Thank You! Videos are great!

Thanks again. I wish I had a first gen factory shop manual or parts manual for pictures of the assembly. I still have my second gen shop manuals. I don't think they will be of any help. Thanks BigPapa!

Thanks Scott! Was it the bushing that hooks the wiper motor bell crank to the wiper linkage?

An elder friend of mine just brought his 1993 first gen 2wd by saying that the wipers don't work. I had him turn on the ignition and turn the wipers on. The motor works but the wipers don't reciprocate. I grabbed the left wiper arm and moved it across the windshield with the wiper motor turned...

I have 100,000 miles on my Pacbrake PRXB on my 2007, 5.9, manual transmission. No issues with the brake itself. Had to replace the compressor once. I installed a Pacbrake PRXB on my neighbors 2006 with the 48re. It works flawlessly and there isn't any extra wiring you have to add to lock the...

Look to the top RIGHT corner and tap on the symbol. It may give you the option to delete the picture.