Recent Content by mrhamfister

FWIW, I have run the truck enough to determine this project a success. I hauled a load of engines 250 miles today. I'm guessing the trailer and load to total about 15,000lbs. It seemed to average fuel pressure about 15psi. Stock, fuel pressure would average under 5psi while towing 7000lbs.

Timd32, thanks for the encouragement and links. I checked them out. The connector link doesn't have a drawing to refer to for identification. The connector I need the terminal for is an "8 way". I'm not sure which one it is at that site. FWIW, I've checked my 1997 FSM and it identifies the...

bump Making some progress. Putting the lift pump relay into a vacant spot in the PDC. It's kinda cheezy but I have a fuse cobbled into the PDC to power the relay. If i can't find a terminal for the original connector under the cab, rear of front left fender, I'll pull the wire out and do a...

In process of mounting a fuel pump on the frame rail. The wire to power it is in the This terminal measures roughly .27mm x 2.7mm and accepts a male spade measuring 2.5mm-2.8mm. existing fuel tank harness connector but I need to run a wire to meet up with it at the connector under the cab, rear...