Here I am

Recent Content by nickg

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff
  1. N

    Engine/Transmission (1998.5 - 2002) Comp Pump wire connected...

    Yes I did get a elbow but cannot use it for my application,I have the hard line going to the wastegate actuator. I did not know which way to go with the turbo mod. there are so many +/- on permanently placing the turnbuckle on. I thought I read that the best thing to do was not to full with it...
  2. N

    Engine/Transmission (1998.5 - 2002) Comp Pump wire connected...

    I also connected my wire to the pump but did not do anything to the turbo. I have the Pulse unit. I will be towing a 5ER 10,000lbs. I am curious if anyone has done the same out there and what kind of performance did you get? I was going to start off with it in the 3rd highest of 4 settings. I...
  3. N

    AutoTrans Idiot light

    A/T Idiot light E. Beck... ... with all the percautions taken stoping as soon as the temps. got to 250/280 I imediately pulled over to bring temps. back down. My transmission continued to perform just fine for months and thousands of miles later. I wanted to insure the best performance possible...
  4. N

    AutoTrans Idiot light

    Auto TransIdiot Light My first time pulling my 5th wheel 10,000lbs. going up a 6% grade 11 miles my temp. gauge read 195 degrees at 45mph. I felt everything was great. The next year same grade except transmission/ egt gauges plus k/n filter were installed. EGT's read 1250degrees, transmission temp with...
  5. N

    AutoTrans Idiot light

    I have installed, egt and transmission gauges. The transmission temp. sender was installed on the hot side going to the radiator. The manuel states that when the transmission gets hot the light comes on in the dash. The temperature that I've seen on my gauge running synthetic oil was aprox 280degrees. The light...
  6. N

    Flashing for Power

    Tahnks Mactruck for the info. I did do my home work before i checked with the dealer about this FLASH I was just not sure it was a good thing. By the way I noticed you have the power edge, how did you hook up to the wastegate,which method the turnbuckle etc. and if so how do you know how much...
  7. N

    Flashing for Power

    Hi fellow members I am asking for your help again. While my rig is about to be serviced real soon, I thought it might be a good idea to do this FLASH be fore I do upgrades with DTT. We continue to get valuable info from our outstanding service the T D R . So I thought I would check this out The...
  8. N

    Air to oil tranmission cooler

    I was wondering if anyone has had any problem with the thermostatic bypass valve regulating oil flow through the cooler according to temperature. Pls. respond quick my upgrades are about to begin Thursday and the mech. didn't know what I was talking about. According to the info the valve...
  9. N

    Exhaust Manifold Bolt Torque

    You did'nt state whether you are under warranty, for wich this is coverd. I just took my rig the dealer to upgrade mine by putting straps on the bolts to keep this from happening. This is noted in the TSB for the year 2001. good luck. Nick
  10. N

    Reverse lights

    I had a problem like that, there are several things that could cause this. The dealer repaired it with a switch on the transmission. The symptom was that it appeared that the gear shift slector was loose and that it was not in gear (reverse) upon wiggling the selector it would light up the back up...
  11. N

    Boost increase with Edge EZ?

    Thanks for the pictures. Garrett it makes it look easier to understand with the straight edge. Have you tried different settings since you installed your ez pulse? If so what about your mileage, were you able to maintain the same mpg. prior to the install. ... ... ... ... ... ... ... Tks. ... Nick
  12. N

    Boost increase with Edge EZ?

    I HAD THE SAME PROBLEM WITH THE INFORMATION THAT WAS SENT WITH MY EDGE PULSE. IT DIDN'T ADDRESS THE AUTOMATICS. I HAVE SEEN THE PICS. ON THE WASTEGATE WITH THE TURNBUCKLE ATTACHED ON IT. IT DOES NOT INDICATE HOW TIGHT TO ADJUST IT. NOR THE SIZE OF THE TURNBUCKLE USED FOR THIS MODIFICATION. I...
Back
Top