Recent Content by Northern Nevada

Ahhhh OK I know what your talking about they go down and bolt onto a terminal board of sorts. I'll ohm check those in the morning. God, I am hoping that's the problem. N N

Howdy all! Thank you for the diagrams I am downloading and printing those. The question is, the fusible links outside of the relay fuse box? Where are those located?

Checked the grounds and they are all showing good continuity. I also ran a wire from the negative battery terminal to the engine block and all of this has solved... Nothing. Still have the exact same problems. I did replace the connectors on the wire from the battery to the fuse box just...

Ok swapped the starter relay out with the trailer relay and Nothing... When this problem began it acted like a sticking solenoid on the starter and I replaced 1 starter. The second starter still wouldn't start. is there a way to directly test the neutral safety switch with a meter? In addition...

Ok 1998 2500 5.9 12 Valve Cummins automatic. No crank when the key is turned to the start position. The Fuel cut-off solenoid is getting voltage for the hold circuit but NOT the pull circuit. I disconnected the harness from the relay and jumped it and the pull circuit does indeed pull the...