Recent Content by nwohsy

any idea who has the best prices for the skyjacker steering dampener?

i am now in the process if tightening up the sloppy front end on my 1995 2500. lukes links are on the way, now i would also like to replace the steering dampener as it now has 148k miles. what are some recommendations? thanks

my 95 2500 with 148k miles has developed the tell tale signs of a faulty tps. slow to lock, unable to hold lock, and downshifting out of od at inoportune times. has anyone disassembled a tps? i would like to try, but without any knowledge my method would probably involve a ball pin hammer. also...

Has anyone installed the Borgeson steering shaft on their truck? what was the performance before and after the install? i realize it will never be a ferrari, but i have a lot of play in my wheel and i am considering it. thanks

i know i've seen the address and phone number many times for the factory shop manual. now that i need to buy one i can't find it anywhere. could someone email me the address, phone number and approximate price i should pay for a 1995 manual. thanks

well the saga continues. the shop recharged the system using a stop leak. the a/c worked 1 day then gave out. it seemed too short a period of time for the freon to leak out. but being that it is 95+ degrees around here this afternoon and my shop is closed today. i decided to buy a refill kit w/...

I have owned my 1995 2500 since 10/98 and every year the system needs to be charged due to freon leak. 4 weeks ago I had the system charged, I took it back after 2 weeks to detect any leaks, eveything was fine. Last week the A/C stopped and today I was told it was down by half with no signs of...

I just installed the pressure loc this past weekend and it went rather smooth considering i started at 9:30 pm with very little light and a constant mist / drizzle. first thing you will need is a pressure guage to test before and after line pressure. i picked one up at a local car quest for $33...

I had the same thing happen to me. I thought I just needed a heavier return spring. I kept adding springs until I couldn't push the pedal down anymore and the problem still persisted. It's not the cable, but rather inside the linkeage assembly. You must disassemble as though you were replacing...

i'm going to wire a lock-up switch on my 95 2500. i was hoping to use the spot next to my o/d off switch (where fog light would be) with a switch from the dealer. the dealer quoted me $56. 00 for the switch, which is outrageous has anyone gotten this switch cheaper ?

you are not alone. i too am looking for a solution. i have the same problem with my 95 w/145k. i first noticed it a little over a year ago. at that time if i started the truck and put it in reverse to back up a short distance in a parking lot i had almost no braking power, though the pedal had a...

put me on the list. matthew mcnichol 47 tommy court mahopac ny 10541. hopefully i'll get one around november, but before the first snow... .

it sounds like your linkage is binding. i had the same problem 3 weeks ago. the pivot shaft rides in a plastic collar. rust / corrosion builds up between the plastic and the shaft. unfortunately spraying wd40 on to the mechanism will not solve the problem. remove the 3 cables, throttle rod and...

well i finally broke down and purchased a bd exhaust brake and pressure loc. now comes the fun part of installing the 60 # valve springs. a call to my local '5 star dealer' was met with the service manager telling me that the truck mechanic did not feel comfortable with his level experience on...