Here I am

okayred

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff
details...

BioDiesel, Diesel Drags, Hunting, Guns
Location
Chicagoland
Truck Profile
1995 black DRW QC, 4X4, 4.10s. It had a straight pipe cat/muffler delete and a NV4500 (Jasper aftermarket) when I bought it in Byron, IL in winter of 2006. The first thing I did was pin the KDP. The head gasket leaked right under the thermostat when I bought it. In the fall of 07 I purchased some brand new 17s from a '07 that went to 22"s. Soon after, I added a #6 plate and Industrial Injection Bosch 300s , Autometer pyro and boost gages. My clutch went out almost immediately (with the plate in the full rear position and the waste gate set almost all open):o. I bought a 450hp Val-air clutch and installed it in November '07 along with a BHAF from NAPA. In December of '07, my heater core finally clogged up fully, so I replaced it with a new one, had the head milled, new 60# springs installed, 3K GSW rigged, ARP 12mm head studs...:-laf

March 2008: Replaced the 4.10s with Yukon 3.73s front and rear, changed the Bosch 300's out with some EDM'd 370s, custom built a 4" exhaust wit
Occupation
Navy Diver

Following

Trophies

  1. 5

    Keeps Coming Back

    30 messages posted. You must like it here!
  2. 1

    First Message

    Post a message somewhere on the site to receive this.
Back
Top