Recent Content by overbuiltcustoms

I have a 2000 4X4 quad cab auto and have been having trouble with a no bus issue after changing my injection pump a while back. After changing the pump none of the gauges worked and let truck sit overnught. Next day started fine and all gauges were working fine. I have since replaced my ECM as...

I bought my computer from Auto Computer Exchange. The unit they sent looked very dirty and used almost like they tested it and boxed it up. My unit with 255,000 looked like new compared to the one sent. After I put the replacement on all codes went away and truck ran great for one day and now I...

My truck is still f--ded up. Light came on this morning. This sucks... .

Just replaced the ecm and all is well. No more codes and cel is off. Wish I would have replaced this 18 months ago.

Check out Solid Axle Industries. They make a free spin kit as well and great people. It might be a bit cheaper as well.

What are the symptoms of a bad ECM or PCM. If you read my other posts you will see I have been troubles with power loss. Just changed VP twice last week cause I thought the one sent may have been bad as I read that has happened (hats off to MWFI awesome people,they overnighted replacment). The...

I just changed the pump twice in the last two weeks. I thought it was the pump but obviously it is not as three pumps are doing the exact same thing. Calibrated the Apps. yesterday and check and cleaned the grounds as well and still doing the same thing.

I have codes read on truck P1693 P0216 P0237 P1689 P1698 They cleared all codes and P1693 is the only on that comes back.

What is the best way to drain coolant and refill. Is there a drain plug on the engine to completly drain all the old coolant out? Thanks in advance.

Well seems like after you hit 250,000 everything bolted to the Cummins is showing its a--. After changing the injector pump last week I originally had no gauges and no bus on the dash. I started the truck the next morning and everything worked. I called MWFI and they sent out another injection...

I am running the stock type carter lift pump and was replaced when I changed the injection pump. I have the fuel pressure gauge tapped off the feed line at the injection pump. Thanks, Brad

Yes it gets the dead pedal and after a while power will come back. How do you calibrate the apps. I replaced it with a new one from mopar and thought thay came calibrated from the factory.

I have a fuel pressure gauge in the truck and at idle shows 12 and 8 underload and will drop to 7 at full power.

I have been having trouble with my truck for a while now. Truck will loose power and has be getting to be much more frequent now. Had check for codes and a 0216 came up. I had installed a new injection pump at 225,000 along with a new lift pump, Apps, MAP, Crank sensor and camshaft sensor. I...