Recent Content by R Temple

Got mine at the dealer. the dash and the bezel was around $600. A very costly item. They had them in stock.

I went to repack the frount wheels on my 3500 two wheel drive and found that I need special sockets, for the brake and wheel nut. Can anyone tell me what the size,s are and where I can order them:mad: -- email address removed --

Years ago we did not have any side to side movement in the hitch plate and we never bent any pins. I think there is enough play so you don't have to worry about bending anything. Hey, it's too cold to get the trailer out up there. I'm not rubbing it in or anything but it has been camping...

I had the same problem, I over filled the differential and the grease ran to the right side brake drum. I had to replace the seal and nut that holds every thing together. You need to grease the bearings with wheel bearing grease when you put together. I don't know where you will use the brass...

You need about 7 inches between the trailer and the bed rail or you will hit and do damage.

If the rear end is over filled the grease will leak onto the breaks. Fill level should be 1/2 inch below fill plug.

I have a early 98 12V 3500 and I have to fill the fuel tank very slow, it seams that the vent is blocked. has anyone had the same experiance and what did you do to correct it. :mad: :mad: