Recent Content by ramlover14

I have a 2005 2500 with a automatic transmission, and when pulling my travel trailer down a hill with the cruise control on, and tow/haul mode my transmission will down shift after a gain of 6 to 7 mph. My friend has a 2006 2500 with a automatic transmission with cruise control and in tow/haul...

Hitch Pull a 35 ft. 5th wheel, installed a Pull Rite super slider hitch in it. These go for 2k plus, found on craigslist for $650. 00 or about the same for a new one that does not slide, Love IT !! It automatticly slides up to 14" back for peace of mind. P. S. My brother damage his truck cab...

Thanks for your help. Found that Eastwoods had the same type of sound deadening for a lot less than Dyna Mat Just got done doing the doors ( 6 hrs. ) Now going to take out back seat.

There was a post about a year ago about noise reduction using some type of tape that you can buy at Home Depot. Does any one remember what that was called? You took off door panels and stuck it to the door. Thanks for any info.

My 2cents I have and older mechanic who lives by me. He uses WD-40, 90w gear oil, and STP. H e mixes it 1/3 each with more WD-40. Brushes it in door seams,nuts and bots, fuel lines, frame nuts and bolts, ect. It collects dust dust in the summer, but washing is easier than rust repair. I use it...

I think have the problem is that a $. 25 grease or less fitting per joint is most of the problem. 05 2500 4x4 all u-joints but front drive shaft replaced at 75,000 miles with NAPA greaseable joints.