Recent Content by RandyCarter

Thanks John, Just to follow up a little. Hot wired the VP44 after not starting, and started OK. Changed the Cam position sensor, problem still existed then changed the crank position sensor and the problem is solved. Even a little better mileage. found a small crack in the plastic of the crank...

Thanks John, yes, seems to be related to heat sink. Always starts when cold, or after sitting for 1 + hours. and always runs good when running. I will try the hot wire to eliminate all other possibles and get back. Thanks much Randy

Thanks John L, Now that it has not started several more times, the ASD relay has been swapped, and a jump start, not seaming to make any difference. I have tracked down the wire,(red with green stripe) according to the maintenance manual to supply power to the fuel pump (shut off solenoid, i...

Thanks JL. Only for a month, 95000miles, 10% at first and becomming more often, starts normal when it does start, run normal (no power loss or surging), when it malfunctions it will not start (even with lots of cranking) until it sits for nearly an hour, fuel pressure is good (indicator light...

starts normal but on occasion will not start at all.

where can i find a new sender at a reasonable price?