Recent Content by RMersiowsky

Started truck after 30 minute stop, drove 1/10 mile at 10 mph, engine falters, push in clutch, engine RPM goes to what sounds like 2K+, Tack indicates 0 RPM, shut down engine with ignition key, restart, engine RPM goes to 2K+, shut down and restart again, engine idles normal. Drive truck home...

High RPM Started truck after 30 minute stop, drove 1/10 mile at 10 mph, engine falters, push in clutch, engine RPM goes to what sounds like 2K+, Tack indicates 0 RPM, I shut down engine with ignition key, restart, engine RPM goes to 2K+, shut down and restart again, engine idles normal. Drive...

I also had to recently replace the LP at 94K miles. Truck was running a little poorly at high RPMs on hot days. Ran great otherwise. Local dealer checked it out for $140 and said that I needed to replace the LP, fuel filter, and VP at a cost of $3300 before I should drive the truck again. Told...

Thanks! P. S. Any words of wisdom on where to get service manuals for my truck. Richard

Request More Info on Pumps Thank you everyone for the informative discussion on the pumps. After reading all the discussions on this site, I thought that I had the pumps on my 1998 Dodge 2500 24-valve figured out; one injector and one engined mounted lift pump. I had changed the fuel filter...

I'm a newbe! What does VP44 code mean? I am also experiencing a fuel problem. I replaced the filter and the lift pump won't pump a drop of fuel to the filter. I had been experiencing a loss of power on very hot days and an unsteading idle when the clutch was in. But other then that, the...