Recent Content by ScottD

I just checked the repair manual and found references to the cam position senser in several places with pictures but no reference to a crank position senser. Maybe they didn't use one on the 2002. If that is the case your probably right. Thanks for the help.

I would think it would have two bolts too if it was holding on a fuel pump. this looks kind of like if you loosened the bolt you could swing the plate back for access to something.

I have a engine oil leak on my 2002. I found it to be comming from behind a plate mounted to the block with one bolt. It measures about 1"X 3" It is directly behind the starter, about 3" above were the dipstick tube enters the block. Does anybody know anything about what this covers and how it...

Thanks for your help. I will see if the local Cummins parps supplier can get the Fleetguard antifreese.

I have a 2002 h. o. that is due to have the antifreese changed for the 1st. time. The manual says to use a low silicate ethelene-glycol based antifreese. Does anybody have any recomendations of brand and where to purchase. I'm trying to avoid going to the dealer and paying 3 times what it is worth.