Recent Content by speedo81972@yahoo.com

I had the same thing happen to me last year while I was stuck in traffic with the ac running. Long story short, the orifice tube clogged. After I replaced it it's been running great. 99 2500, 2wd, nothing special

I have a physical thump in my steering column when I turn the wheel through center position in either direction. I replaced the ball joints 2 years ago and replaced the pitman arm, idler arm and all 4 tie-rod ends about a month ago. This just started happening "out of the blue" the other day. I...

This may sound strange, but I think changing the alternator cured most if not all of my woes. While I was scratching my head and trying to figure things out I noticed my alternator screaming like a banshee (another new ailment). After changing it everything seems to be fine (for now). The...

Latest update. I jumped the lift pump straight from the battery, bled the injectors and truck started fine. Voltage to the pump connector is 13+ volts when the truck is running. When I shut the engine down voltage drops to nothing when it should stay powered for 20 secs. I put everything back...

My truck won't start, found the lift pump not putting out any pressure. Changed the pump (foolish mistake) without first checking voltage to the pump. I'm only getting 8.6VDC to the pump. The manual says that the ECM controls the lift pump, but I would think that would be an on/off thing. I...

Looking for some thoughts on continuing failure of my Crankshaft Position Sensor (CSS). I have a '99 5.9 lt. 120k mi. and have replaced the CSS every year for the past 3 years. I get a check engine light, and an engine analyzer calls out the CSS every time. I'm wondering if any of you have an...