Recent Content by Stevel

I could use some help. I want to put on a 2nd. steering stabalizer. Is there a kit available. One of the posts I read suggested that my Dodge dealer might have one disigned for my 96 4x4 duelly. I just don't think I should have to replace the steering gear box as some have done. Does anyone...

I have a 96 4x4 and I know others have had this problem, but I am trying to solve it again. When I am at 45 mph or higher and hit a bumpy road the front end will sometimes start to shimmy very aggressively and only stops when I slow down and I have to slow down or it feels like the front end...

thanks thanks for the feedback. I greased the bearing using needle tip on my grease gun to reach in between the roller bearings. It worked pretty well. It was a job protecting the outer bearing from getting dirty while I beat out the studs and replaced the rotor. I never did figure out how to...

:confused:I am trying to replace my front rotor on my 96 1ton 4wd. I followed some of the past suggestions I read here and reached a point where I think there is a problem. I had to use a puller to remove the rotor but the bearing assembly pulled apart. What happened is that I did loosed the...

4 x4

Just to revisit what has been discussed some in the past. I have a 96 3500 and need to replace a front drivers side rotor because it is severly scored on one side due to metal to metal from pad rivots. Will the hub rotor asembly just come off when I attempt to remove the cotter key and 1-3/4"...

THANK YOU ALL!!!!! I am no longer insane!! (well, opinions may differ on that). We decided to go the 'pull the door jamb button and cut the wire' route, so that's just what we did - and on our '96, it was the black with light blue tracer that was the right wire to cut. I still have my driver...

Hi all, OK, we've learned a ton from reading the archives - enough that we got brave and installed the TST plate and gauges this last weekend... but that's another story! I've done numerous searches on how to remove the danged door dinger from my '96. You know, the danged dinger that screams...