Recent Content by TFreeman

I did a tire rotation the other day when I shot the video. I think the vibration moved to the rear of the truck. So like you said tires do that, I will have the balance checked. Steering will be here today minus the damper that should show up on Monday.

So I have finally gotten around to checking some things on the truck. When I posted this I had gone 7 days with out driving the truck so idk if I was wrong or hadn't quite pinpointed it before or the vibration has become more evident, but now as of this morning I believed it was rotational...

Am I wrong in assuming that you found the difference in heat while it was on the truck, then removed it and noticed the obvious bad joint? Also if I need to or otherwise decide to re torque the TC bolts, ss hold I remove, apply locktite, re torque to spec? What ft/lbs is spec? Thanks for...

Looks like I missed cerberusiam's last post. The tires are nitto terra grapplers, few sizes bigger than stock, 305/315 can't remember off the top of my head. looks like I've got some more diagnosing to do, and I've got to find the exact time this is going on. I was out of town for the last...

Thanks for that info. I guess if the rest of the rotating driveline checks out I'll try and get at the back side of the HD

Motorhead thanks, I like the channel lock method, will use that, I'll check the front and redo the rear. I did not notice any rust on the previous check, but will double check next time I can get under there.

Post number 3 has most of that info answered. I do need to raise the front end and check driveline. Rear has been checked.

Correct me if I'm wrong, but it should have an indexing line from the factory. See 19 sec mark in the above video

https://youtu.be/1frTAhL7Tfs Here is the crappy video I shot. Thanks for the reply. The truck is an automatic transmission. No recent repairs made. I did the injectors about 4 years ago, no other repairs beyond rear ujoint at the axle and some maintenance items. I am due up for a tire rotation...

Hi everyone, first post on the forum here. I have an 06 2500 QCSB 4x4 with around 182k miles on it. I have began to notice a vibration under power at around 1500 rpms. Seems to stop when I come off the accelerator. Some things I have been reading have led me to think it may be the HD, I'm...