Recent Content by troutscout

I saw that you had mentioned AES in a different thread so i gave them a call. I can send them mine and they can repair it,depending on whats wrong,for $580-$790. I can also purchase a rebuilt unit from them for $895 and not have to wait. Just a little info for folks with the same trouble.

I removed the Edge EZ this morning. started the truck and it idled fine. I let it run for a few minutes and decided to go to the parts store to see if i could get the codes cleared and get a new fuel filter. I made it to the store and they said that they could not do it. My brother has a scan...

I checked the alternators voltage last night. It was 14. 1 volts. I did not check it at the ECM while running. If 14 volts is making It to the ECM, is that to much?

I did not mention it earlier but i have a Edge EZ box on the truck(EZD1000). Could that be the issue? Should i remove it?

I have 12. 9 volts at 48 and 50. 4. 99 volts between 10 and 11. Suggestions? Thanks

Ok, at the risk of sounding stupid,what i thought was the ECM is not. Where is it located?

Thanks guys. Yes i can trouble shoot it if i know what to look for. Please post the detailed instructions. I had to go out of town for the weekend, so it will be monday afternoon before i can work on it

That info would probably help! The truck is a 2001 2500 automatic

Hey everyone. I started driving my truck this morning and it developed a small hesitation/rpm drop. As i drove down the road the truck started accelerating and decelerating on its own with little or no throttle response. The truck would run at idle speed and then accelerate for different...

just wanted to say thanks to JLandry, ROverturf, FourBarR Mopars1 and Snoking for the insight. i guess im about to order a pump from Blue chip unless someone thinks that there is a better pump. you guys saved me a bunch of cash. thanks:)

can anyone tell me where the governor presure solenoid and governor presure sensor are located. going to try and change those along with the speed sensor this week. thanks

it is p0216. i had written it down incorrectly. that code probably showed up when i had to replace the supply/ lift pump a couple of years ago. is that what a vp44 is, or is it the injector pump itself. i have never checked the codes . i did not know that was possible. the truck has 118437...

sounds like u and i are having very similar issues. my post is titled "throttle response/ shifting issues. if i find out any info i will pass it along. check my post for possible help. good luck. this place is great for folks helping each other out

here are the codes that came up. ppcu p1693 pdone pecu p0126 . pdone came up 3 times. any help is greatly appreciated

this has probably been discussed a thousand times but i am brand new to the site. when i first start my truck and take off it seems to down shift and the truck will not accelerate. sometimes the rpm's will increase but the truck will not accelerate. normally i have 2 options. the first is to let...